WE-RWN300 POE Network Card Reading 2.GHz Base Station
- ◆ It can detect 1000 electronic tags at the same time, and the antenna detection distance can reach 100 meters in the air.
- ◆The communication distance with the WiFi hotspot (50mW) is not less than 80 meters, and the networking is simple.
- ◆ The wireless signal field strength of the electronic tag can be measured and the actual distance of the label can be calculated.
- ◆You can call the tag for sound and light reminder (only applicable to sound and light tag)
- ◆ It can be connected to 4 card reading antennas, with a wider reading angle and more accurate positioning.
- ◆The card reading antenna can be extended by 30 meters (115200bps), which is easy to install and deploy.
- ◆Provide open protocol, third-party systems can easily communicate with the card reader through the network.
- ◆SDK development kit is provided to facilitate users to develop their own tag positioning management system.
- ◆POE power supply or 10~26V wide voltage power supply, each card reader consumes no more than 800mA (12V).
WE-RWN300 network card reading base station can be powered by POE or DC, and can be quickly deployed in places where there is a WiFi signal by WiFi wireless or POE Ethernet access network. The reader detects the tag at a distance of up to 100 meters, which can not only read the ID value of the electronic tag, but also calculate the actual distance of the tag by measuring the strength of the wireless signal field of the electronic tag. Several base stations (card readers) work together, which can determine the specific location of electronic tags within the effective range, realize real-time monitoring of the location of people and items, and facilitate the tracking and search of people and items.
WE-RWN300 network card reader base station can be connected to four card reading antennas, one main and three standby, and any one of them can be used. A base station installation point can also be connected by two card reader antennas or four card reader antennas, one to the left and one to the right; four card reading antennas, one to the left and one to the right; One forward and one backward, so that the card reading angle is wider and the positioning is more accurate. Label positioning is widely used in many application fields such as intelligent warehouse management, logistics tracking, indoor navigation, and personnel management.
| project | specification |
| Light | [BT]: Bluetooth operation indicator
Solid light: Bluetooth connection is normal Always off: Bluetooth disconnected |
| [RUN], the system operation indicator
Constant light (occasional flash): The connection is normal Constant extinction (occasional flash): Abnormal online connection |
|
| [WiFi], WiFi wireless working indicator | |
| Solid on: The connection to the WiFi hotspot is normal. | |
| Constant Off: Abnormal connection to WiFi hotspot. | |
| [Mode], mode indicator
Solid light: WIFI mode. Constant extinction: Ethernet mode. |
|
| [ANT], the card reading antenna 0 indicator, read the label and flash it once. | |
| Ethernet interface | 10M/100M adaptive |
| POE power supply | |
| DHCP and UDP protocols are supported | |
| SDK development kits are provided to support access to third-party systems | |
| WiFi wireless | Wireless protocol: 802.11 b/g/n |
| Transmitting power: 100mW | |
| Operating frequency: 2.4~2.4835GHz | |
| Provide open application communication protocols and support access to third-party systems | |
| Card reading antenna | Communication interface: RS232 serial port |
| Baud rate: 115200, 57600, 38400, 19200, 9600bps | |
| Interface specifications: 4P terminal header (5V, GND, TXD, RXD) | |
| USB parameter setting | USB-mini interface, CH340 driver virtual serial port, Windows setup software. |
| Bluetooth parameter settings | It supports BLE 4.2 specification communication distance of 30 meters (depending on the environment). |
| Operating temperature | -40℃~85℃ |
| Operating humidity | Humidity less than 95% (no condensation) |
| Installation method: | Ceiling mounting / wall mounting (wall mounting, holding rod, hoop, rail mounting) |
| Power supply | POE, 12V (1A), supports DC12V-DC26V wide voltage supply |
| size | Length 121mm× width 78mm× height 51.4mm |
| Water and dust resistant | IP67 |
| weight | 530g |
